Msa G1 Serial Number Location __LINK__

How to Find the Serial Number of Your MSA G1 SCBA

The MSA G1 SCBA is a self-contained breathing apparatus designed for firefighters and other emergency responders. It provides respiratory protection in environments where the air may be contaminated by smoke, toxic gases, or oxygen deficiency. The MSA G1 SCBA has many features and components that make it a reliable and comfortable device for life-saving operations.

One of the components of the MSA G1 SCBA is the control module, which displays important information such as cylinder pressure, battery status, temperature, and alarms. The control module also has a serial number that identifies the specific unit and can be used for warranty, service, or maintenance purposes. The serial number is located on the back of the control module, behind a protective cover. To access the serial number, you need to follow these steps:

Turn off the MSA G1 SCBA by pressing and holding the power button on the regulator until you hear a beep.

Remove the facepiece from the regulator by pressing the release button on the side of the regulator.

Detach the regulator from the backplate by pulling the red tab on the bottom of the regulator.

Locate the control module on the backplate. It is a rectangular device with a dual-color LCD screen and two buttons.

Lift the protective cover on the back of the control module by pulling on the tab at the bottom of the cover.

Look for a label with a barcode and a 10-digit number. This is the serial number of your MSA G1 SCBA control module.

Write down or take a picture of the serial number for future reference.

Replace the protective cover on the back of the control module by snapping it into place.

Reattach the regulator to the backplate by aligning it with the mounting bracket and pushing it until it clicks.

Reconnect the facepiece to the regulator by inserting it into the coupling and twisting it clockwise until it locks.

Turn on the MSA G1 SCBA by pressing and releasing the power button on the regulator. You should hear a beep and see a green light on the HUD.

You have successfully located and recorded the serial number of your MSA G1 SCBA control module. You can use this number to register your product, request service, or troubleshoot any issues with your device. For more information about your MSA G1 SCBA, you can refer to the operating manual or visit the official website.

In addition to the control module, the MSA G1 SCBA also has other components that have serial numbers. These include the cylinder, the facepiece, and the speaker module. The serial numbers of these components can also be useful for identification and service purposes. Here is how to find them:

The serial number of the cylinder is located on a metal plate near the valve. It is a 7-digit number that starts with a letter. You can also find the manufacture date, the hydrostatic test date, and the pressure rating of the cylinder on the same plate.

The serial number of the facepiece is located on a label inside the mask. It is a 10-digit number that starts with 10. You can also find the model number, the size, and the approval information of the facepiece on the same label.

The serial number of the speaker module is located on a label on the back of the device. It is a 10-digit number that starts with 11. You can also find the model number and the approval information of the speaker module on the same label.

By knowing the serial numbers of your MSA G1 SCBA components, you can ensure that you have the correct and compatible parts for your device. You can also keep track of the service history and warranty status of your device. If you have any questions or concerns about your MSA G1 SCBA, you can contact MSA Customer Service at 1-800-672-2222 or visit the contact page. ec8f644aee